中科攪拌機的打孔技巧你了解嗎?
攪拌機并不難打，但很多人不太清楚如何操作攪拌機。其實中科攪拌機打孔技術并不難操作，你看完下面的內容后就知道怎么打孔了。詳情請參閱:
The mixer is not hard to beat, but many people don't know how to operate it. In fact, the drilling technology of Zhongke mixer is not difficult to operate. You will know how to drill after reading the following content. Please refer to:
隨著科學技術的發展,應用市場的需求,攪拌機越來越快速的發展,需求也在不斷上升,每個人都很熟悉它,但仍有少量的客戶不知道攪拌機的穿孔技巧,以下是介紹攪拌機的穿孔的技能:
With the development of science and technology, the demand of the application market, the mixer is developing more and more rapidly, and the demand is also rising. Everyone is familiar with it, but there are still a small number of customers who do not know the perforation skills of the mixer. The following is an introduction to the perforation skills of the mixer:
1. 攪拌機的射孔支管不得使用電焊(氣焊)工具，因為電焊會破壞攪拌機的內襯塑料，支管的連接必須用專用管件進行坡口連接;
1. Electric welding (gas welding) tools shall not be used for the perforating branch pipe of mixer, because electric welding will damage the inner plastic of mixer, and the connection of branch pipe must be beveled with special pipe fittings;
2. 在鉆孔過程中，塑料渣襯很容易掉入混合器原管道中，所以在操作過程中要多加注意，否則會堵塞末端水點;
2. In the process of drilling, the plastic slag lining is easy to fall into the original pipeline of the mixer, so pay more attention in the operation process, or the end water point will be blocked;
3.雖然鉆孔時內襯塑料相對較軟，但使用剛性鉆頭易強行破壞攪拌機，且邊角不易平整。
3. Although the lining plastic is relatively soft when drilling, the mixer is easy to be damaged by force when using a rigid drill bit, and the corners are not easy to be flat.
不要在有孔的分支上使用焊接工具，因為這樣會損壞襯層。
Do not use welding tools on the branch with holes, as this will damage the lining.
5. 當鉆孔時，殘渣會掉入玻璃襯混合器，所以操作時請注意，否則會造成堵塞。
5. When drilling, the residue will fall into the glass lining mixer, so please pay attention to the operation, otherwise it will cause blockage.
6. 由于玻璃襯里攪拌器的襯里是軟的，鉆頭會損壞。另外，邊角不整齊。
6. Because the lining of the mixer with glass lining is soft, the drill bit will be damaged. In addition, the corners are not neat.
一般情況下，看完以上內容后，就可以熟練掌握攪拌機打孔了，希望對使用攪拌機能起到一定的幫助。
In general, after reading the above content, you can master the drilling of the mixer skillfully, hoping to play a certain role in using the mixer.
以上是中科攪拌機廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.bflrsn.cn
The above content is introduced by the mixer manufacturer of China Science and Technology Co., Ltd. for more information, please visit the website: http://www.bflrsn.cn
