講解混凝土自上料攪拌車的調試條件
混凝土自上料攪拌車廣泛用于基礎、灌樁、樓板、路面、場坪、護坡、溝渠、河道、橋梁、涵洞、隧道、中小型水庫等中小型工程。為了更好的使用設備，用戶們在購買設備時須要對企業的產品性能、質量及服務作深入了解。接下來混凝土自上料攪拌車廠家主要講一下相關的調試條件，比較關鍵。
Concrete self loading mixer is widely used in small and medium-sized projects such as foundation, cast-in-place pile, floor slab, pavement, yard, slope protection, ditches, rivers, bridges, culverts, tunnels, and small and medium-sized reservoirs. In order to better use the equipment, users need to have a deep understanding of the product performance, quality and service of the enterprise when purchasing the equipment. Next, the manufacturer of concrete self loading mixer mainly talks about the relevant commissioning conditions, which are more critical.
1、需調試設備各部件、附件及隨機東西應按標準裝備齊全。
1. All parts, accessories and accompanying items of the equipment to be commissioned shall be complete as per the standard.
2、備好液壓油和潤滑油脂，液壓油的油質應符合要求。
2. Prepare hydraulic oil and lubricating grease, and the oil quality of hydraulic oil shall meet the requirements.
3、按規定加注液壓油、燃油、潤滑油和冷卻水，且液壓油加規定油面。
3. Fill the hydraulic oil, fuel, lubricating oil and cooling water as required, and add the hydraulic oil to the specified oil level.
4、應對混凝土泵進行檢查、調試和試運轉，使之進入正常作業狀況，液壓體系調試后應符合標準。
4. The concrete pump shall be inspected, debugged and commissioned to make it work normally. The hydraulic system shall meet the standards after commissioning.
5、調試用混凝土自上料攪拌車管管路管徑為125。
5. The pipe diameter of concrete self feeding mixer truck for commissioning is 125.
6、實驗混凝土應符合標準。
6. The experimental concrete shall conform to the standard.
7、設備應安放在平整堅實的地面上。
7. The equipment shall be placed on a flat and solid ground.
每天工作結束后，司機應負責向攪拌罐內注入清水并以每分鐘14—18轉的速度旋轉5—10分鐘，然后將水排去，以保障攪拌罐內清潔。用高壓水清洗攪拌罐各個部分時，應注意避開儀表及操縱桿等部位。
At the end of each day's work, the driver shall be responsible for injecting clean water into the mixing tank and rotating it for 5-10 minutes at the speed of 14-18 revolutions per minute, and then draining the water to ensure the cleanness of the mixing tank. When cleaning all parts of the mixing tank with high-pressure water, avoid instruments, control rods and other parts.
攪拌罐內外殘存的混凝土渣塊時，以及在機修人員進入攪拌罐內進行檢修和焊補作業時，需先關閉攪拌車發動機，使攪拌罐完全停止轉動。
When removing the residual concrete slag inside and outside the mixing tank, and when the machine maintenance personnel enter the mixing tank for maintenance and repair welding, the engine of the mixing truck shall be shut down first to make the mixing tank stop completely.
在機修人員進入攪拌罐內的工作期間，需要保障攪拌罐內通風良好，無可燃氣體及有害灰塵。在攪拌罐內使用電動工具操作時，操作人員需要有良好的絕緣保護。
During the working period when the machine maintenance personnel enter the mixing tank, it is necessary to ensure that the mixing tank is well ventilated and free of combustible gas and harmful dust. When electric tools are used in the mixing tank, the operators shall have good insulation protection.
用戶們除了對在購買產品時需嚴格檢驗以外，其實在日常保養問題上也是不可缺少的必要工作，這樣才能達到在操作過程中使用輕松且使用壽命更長的理想效果。更多相關內容就來我們網站http://www.bflrsn.cn進行咨詢吧！
In addition to strict inspection when purchasing products, users are also indispensable and necessary for daily maintenance, so as to achieve the ideal effect of easy use and longer service life in the process of operation. More relevant content will come to our website http://www.bflrsn.cn Consult!
下一篇：攪拌車的正時皮帶保養包含什么？上一篇：全自動攪拌車拌筒停轉故障的分析
