混凝土中科攪拌機防抱死系統出現故障的檢查方法！
混凝土中科攪拌機防抱死系統出現故障的檢查方法！
Concrete in the anti lock system of mixer failure inspection method!
一、檢查混凝土攪拌機的駐車制動是否完全釋放.
1、 Check that the parking brake of the concrete mixer is fully released
二、檢查制動儲液罐液面是否符合說明書的規定.
2、 Check whether the level of brake fluid reservoir is in accordance with the specification
三、檢查所有的制動管路有無損壞變形和泄漏跡象.
3、 Check all brake lines for signs of damage, deformation and leakage
四、檢查防抱死系統的所有熔斷絲是否完好,導線是否破損,插座是否牢固.
4、 Check whether all fuse wires of anti lock system are in good condition, whether the wires are damaged and whether the socket is firm
五、檢查蓄電池容量和電壓是否符合規定,正負極導線的連接是否可靠.
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the connection of positive and negative leads is reliable
六、檢查防抱死系統、ECI_I插接器連接是否牢靠.
6、 Check anti lock system, ECI_ I connector connection is reliable
七、檢查電路連接處是否腐蝕、損壞、松脫或接觸不良,ABS的各搭鐵線搭鐵是否可靠.
7、 Check whether the circuit connection is corroded, damaged, loose or poor contact, and whether the grounding wire of ABS is reliable
八、檢查輪胎是否符合要求.
8、 Check the tires for compliance
九、檢查混凝土攪拌機的車輪轉動有無阻滯,輪轂軸承間隙是否正常.
9、 Check whether the wheel rotation of the concrete mixer is blocked and whether the hub bearing clearance is normal
感謝您的閱讀，希望對您有所幫助，如您想要了解更多內容歡迎點擊中科攪拌機http://www.bflrsn.cn官網。
Thank you for your reading and hope to help you. If you want to know more, please click on Zhongke mixer http://www.bflrsn.cn Official website.
下一篇：小型混凝土攪拌車如何清理土渣？上一篇：中科聚峰攪拌車罐子不轉如何應對？
