攪拌車如果要改裝的話就要符合一定原則
攪拌機的生產需要正確的底盤和正確的頂部才能完成。底盤來自底盤企業制造商，然后在攪拌機改裝廠進行改裝。今天，我們將普及攪拌機的改裝知識。
The production of mixer requires correct chassis and correct top. The chassis is from the chassis brand manufacturer, and then modified in the mixer modification plant. Today, we will popularize the knowledge of mixer modification.
攪拌機改造部分應留有足夠的維修空間，特別是潤滑點、緊固螺栓、電池和制動部件的操作空間。
Sufficient maintenance space shall be reserved for the mixer reconstruction, especially the operation space for lubrication points, fastening bolts, batteries and braking components.
允許改變發動機的冷卻系統，但不能妨礙進氣和排氣。
It is allowed to change the cooling system of the engine, but the air intake and exhaust shall not be obstructed.
安裝改裝件時，總成及各部件必須保證通過、操作、可靠、功能齊全、維修方便。
When installing the modified parts, the assembly and all components must ensure safe passage, safe and reliable operation, complete functions and convenient maintenance.
當改裝件伸出駕駛室上方時，駕駛室應能自由翻轉。
When the refitted parts protrude above the cab, the cab shall be able to turn freely.
全自動攪拌車廠家認為攪拌車改造后的攪拌機的驅動、制動和轉向性能不受影響。
The manufacturer of full-automatic mixer thinks that the driving, braking and steering performance of the mixer after the transformation of the mixer will not be affected.
改造后的攪拌機外形尺寸不得超過限值，后懸掛不得超過標準限值。
The overall dimension of the modified mixer shall not exceed the limit value, and the rear suspension shall not exceed the standard limit value.
改裝后的攪拌機應保證維修方便。不得隨意改變攪拌機軸距。對于加長、縮短車架縱梁、改變橫梁位置等特殊情況，必須咨詢底盤部技術人員，避免改裝出現質量問題。
The modified mixer shall ensure convenient maintenance. It is not allowed to change the wheelbase of the mixer at will. For special cases such as lengthening, shortening the longitudinal beam of the frame and changing the position of the transverse beam, the technical personnel of the chassis department must be consulted to avoid quality problems in the modification.
以上便是問題的相關解答內容了，如果您想獲取更多相關信息，就來關注我們網站www.bflrsn.cn吧！
The above is the relevant answers to the questions. If you want to get more relevant information, please follow our website!
下一篇：和廠家淺談關于攪拌車的知識上一篇：攪拌車運送混凝土時攪拌筒轉速問題
