全自動攪拌車防抱死系統出現故障時的檢查方法
全自動攪拌車在使用過程中防抱死系統出現故障,從而影響攪拌車的正常工作.為了盡快故障,必須先找出故障的原因.下面根據全自動攪拌車廠家從事攪拌車維修的經驗,為大家介紹一下全自動攪拌車防抱死系統出現故障時的檢查方法.
In order to solve the problem as soon as possible, it is necessary to find out the cause of the problem. Next, according to the experience of the manufacturer of the automatic mixer in the maintenance of the mixer, we will introduce the inspection methods when the anti-lock system of the automatic mixer breaks down
一、檢查全自動攪拌車的駐車制動是否完全釋放。
1、 Check whether the parking brake of the automatic mixer is fully released.
二、檢查制動儲液罐液面是否符合說明書的規定。
2、 Check whether the fluid level of the brake fluid reservoir meets the requirements of the manual.
三、檢查所有的制動管路有無損壞變形和泄漏跡象。
3、 Check all brake pipes for damage, deformation and leakage.
四、檢查防抱死系統的所有熔斷絲是否完好,導線是否破損,插座是否牢固。
4、 Check whether all fuses of the anti-lock system are in good condition, whether the wires are damaged, and whether the sockets are firm.
五、檢查蓄電池容量和電壓是否符合規定,正負極導線的連接是否可靠。
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the positive and negative wire connections are reliable.
六、檢查防抱死系統、ECI_I插接器連接是否牢靠。
6、 Check anti-lock system and ECI_ I Check whether the connector is firmly connected.
七、檢查電路連接處是否腐蝕、損壞、松脫或接觸不良,ABS的各搭鐵線搭鐵是否可靠。
7、 Check whether the circuit connection is corroded, damaged, loose or in poor contact, and whether the grounding wire of ABS is reliable.
八、檢查輪胎是否符合要求。
8、 Check whether the tyres meet the requirements.
九、檢查全自動攪拌車的車輪轉動有無阻滯,輪轂軸承間隙是否正常。
9、 Check whether the wheel rotation of the fully automatic mixer is blocked and whether the hub bearing clearance is normal.
全自動攪拌車防抱死系統出現故障時的檢查方法就從以上所講解的9個方面來做，當然平常使用中要想順利使用下去，就要定期對其進行檢查維護。更多事項就來我們網站http://www.bflrsn.cn咨詢！
When the anti-lock braking system of the automatic mixer breaks down, the inspection methods should be done from the above nine aspects. Of course, if you want to use it safely and smoothly in normal use, you should check and maintain it regularly. Come to our website for more matters http://www.bflrsn.cn consulting service
