自上料攪拌機軸承的功能和選擇
在中科自上料攪拌機中，軸承是一個非常重要的部件。它有什么功能?我們該如何選擇?
Bearing is a very important part in Zhongke self feeding mixer. What function does it have? How should we choose?
中科自上料攪拌機軸承主要承受徑向力，其次承受軸向力;軸承應選擇兩種軸向力的軸承，如角接觸球軸承，圓錐滾子軸承，或推力球軸承，角接觸球軸承的高速，圓錐滾子軸承或推力球軸承的動態軸承。
The bearing of Zhongke self feeding mixer mainly bears radial force, followed by axial force; two kinds of axial force bearing shall be selected for the bearing, such as angular contact ball bearing, tapered roller bearing, or thrust ball bearing, high speed of angular contact ball bearing, dynamic bearing of tapered roller bearing or thrust ball bearing.
軸承支持的角色作用,即如果直接攪拌軸配合孔,行駛阻力大,磨損大,傳輸不容易改變,和軸承是依靠組件間的滾動接觸來支撐傳動部位,因此抗滑阻力小,能耗少,開始容易,等等。
The role of bearing support, that is, if the direct mixing shaft fits the hole, the driving resistance is large, the wear is large, the transmission is not easy to change, and the bearing is supported by the rolling contact between components, so the anti sliding resistance is small, the energy consumption is small, and it is easy to start, and so on.
軸承的使用壽命決定了主軸的使用壽命，從而影響了使用壽命，在很多情況下軸承是國家標準，通常加工軸單元都會按照對軸強度的要求，按照國家標準單元生產。在軸承的選擇上要選擇工作平穩、噪聲小的軸承，即對以上需求進行一系列的實踐總結和理論核算。
The service life of the bearing determines the service life of the main shaft, thus affecting the service life. In many cases, the bearing is a national standard. Generally, the processing shaft unit will be produced according to the requirements of the shaft strength and the national standard unit. In the selection of bearings, we should choose the bearings with stable work and low noise, that is, a series of practical summary and theoretical accounting for the above needs.
為了避免滑動軸承,形成內部球滑動軸承,軸承損壞,我們確信生產深溝球軸承,內圈法蘭,降低了滑動軸承表面,從而減少摩擦和熱量,壽命長,精度高、熱值低,建議套件,高剛性、低噪音、高耐磨性等特點。
In order to avoid sliding bearing, forming internal ball sliding bearing and bearing damage, we are sure to produce deep groove ball bearing and inner ring flange, reducing the surface of sliding bearing, thus reducing friction and heat, long service life, high accuracy, low heat value, recommended kit, high rigidity, low noise, high wear resistance and other characteristics.
看了上面的文章我們是否從給中科自上料攪拌機軸承的作用和選擇中知道了，從上面我們了解到軸承是一個非常重要的部件，所以在平時使用的時候要注意保養。
After reading the above article, do we know from the function and selection of the bearing of the self feeding mixer of gezhongke? From the above, we know that the bearing is a very important part, so we should pay attention to the maintenance when using it at ordinary times.
