移動式自動上料攪拌車維修要注意什么？
、當啟動電噴車的時候不能直接踩油門，否則就睡造成攪拌罐車的啟動不良的狀況，所以我們大家一定要注意哦。
First, when you start the EFI truck, you can't step on the accelerator directly, otherwise it will cause the bad start of the mixing tank truck, so we must pay attention to it.
第二、不能給攪拌罐車的林泰螺母進行涂油，因為不少的司機覺得給輪胎螺母涂上油脂就是為了讓螺母避免生銹，但是是不可以這樣做的，因為會給攪拌罐車行車的時候帶來極大的安全隱患，螺栓和螺母擰緊之后本身是有自鎖特點的，潤滑油則會讓自鎖系數下降。所以攪拌罐運作過程中就會造成螺栓螺母松動這樣就會產生安全事故。
Second, you can't oil the Lintai nut of the mixing tank truck, because many drivers think that greasing the tire nut is to prevent the nut from rusting, but you can't do it, because it will bring great security risks to the mixing tank truck when driving. After the bolt and nut are tightened, they have the characteristics of self-locking, and the lubricating oil will reduce the self-locking coefficient. Therefore, during the operation of the mixing tank, the bolts and nuts will become loose, which will cause safety accidents.
第三、不能直接沖洗攪拌罐車的車身，因為攪拌罐車的車身內部機構比較復雜，若是被水沖洗的話，水分就會沉淀在機身不容易干燥，這樣就會造成攪拌罐車的零部件生銹，久而久之就會造成損壞。
Third, the body of the tank mixer can not be washed directly, because the internal structure of the tank mixer is relatively complex. If it is washed by water, the water will precipitate in the body, and it is not easy to dry, which will cause the parts of the tank mixer to rust and damage over time.
今天小編講解的關于攪拌車維修的禁令的三點，希望可能幫助到司機師傅，讓攪拌罐車在使用的時候可以更加的便捷，所以大家在維修的時候一定要注意以上三點哦，這樣才能夠延長攪拌罐車的使用壽命，今天小編的內容就與大家分享到這里，但是我們在長期使用情況下也要進行保養哦
Today, Xiaobian explained three points about the ban on the maintenance of the mixer truck. I hope it can help the driver master and make the mixer truck more convenient in use. Therefore, we must pay attention to the above three points when maintaining the mixer truck. Only in this way can we extend the service life of the mixer truck. Today's Xiaobian's content is shared with you here, But we also need to carry out maintenance in the case of long-term use. If you want to know more,
