自上料攪拌車置罐體可選材質
自上料攪拌車置罐體可選材質嗎？實際上當然是可以的，比如攪拌車置罐體可選材質，攪拌車罐體使用碳鋼或不銹鋼制做。下面就讓自上料攪拌車廠家來分析分析這個事兒吧。
Is the tank body of the self feeding mixer optional? In fact, it is certainly possible. For example, the tank body of the mixer truck can be made of carbon steel or stainless steel. Let's let the manufacturer of self feeding mixer truck analyze this matter.
選裝配置攪拌車主要包括取力器、攪拌筒前后支架、進口減速機、液壓系統、攪拌筒、操縱機構、清洗系統等。攪拌車工作原理是：通過取力裝置將汽車底盤的動力取出，并驅動液壓系統的變量泵，把機械能轉化為液壓能傳給定量馬達，馬達再驅動減速機，由減速機驅動攪拌裝置，對混凝土進行攪拌。
The optional mixer truck mainly includes power takeoff, front and rear supports of mixing drum, imported reducer, hydraulic system, mixing drum, control mechanism, cleaning system, etc. The working principle of the mixer truck is to take out the power of the vehicle chassis through the power take-off device, drive the variable pump of the hydraulic system, convert the mechanical energy into hydraulic energy and transmit it to the quantitative motor. The motor then drives the reducer, and the reducer drives the mixing device to mix the concrete.
可選裝實現功能攪拌車是多年的機械設計、制造、焊接經驗為依據，在充分消化、吸收國內外著名自動上料攪拌車制造商先進制造技術的基礎上，經過上百次進出料速度、出料率、攪拌效率、扭曲彈性、行駛性能等試驗合格后制造出的一款新產品，是商品混凝土運輸的理想設備。
The optional functional mixer truck is a new product based on many years of mechanical design, manufacturing and welding experience. On the basis of fully digesting and absorbing the advanced manufacturing technology of famous automatic feeding mixer truck manufacturers at home and abroad, it is manufactured after hundreds of tests on feeding and discharging speed, discharging rate, mixing efficiency, torsion elasticity and driving performance. It is an ideal equipment for commercial concrete transportation.
攪拌車系統說明攪拌筒：該車型所采用的攪拌筒形式是一種應用較為普遍的結構形式，攪拌筒采用梨形結構，其清洗用水和運輸過程中視需要補充加入的拌合水，均由攪拌筒頭部進料口處注入筒內。
Description of mixer truck system: the mixer drum adopted by this model is a commonly used structural form. The mixer drum adopts a pear shaped structure. Its cleaning water and mixing water added as needed during transportation are injected into the drum from the feed port at the head of the mixer drum.
傳動系統：該攪拌筒的驅動方式為以發動機為動力源，由發動機后端的取力器取力，通過傳動軸傳遞到變量柱塞液壓泵，經定量柱塞油馬達，再通過減速機帶動攪拌筒轉動。
Transmission system: the driving mode of the mixing drum is to take the engine as the power source, take the power from the power take-off at the rear end of the engine, transmit it to the variable plunger hydraulic pump through the transmission shaft, drive the mixing drum through the quantitative plunger oil motor, and then drive the mixing drum to rotate through the reducer.
攪拌筒的進出料系統（裝料和卸料機構）：是輔助攪拌筒工作的重要裝置。
The feeding and discharging system (loading and discharging mechanism) of the mixing drum is an important device to assist the mixing drum.
操縱系統：是整個自動上料攪拌車的控制部件，操縱面板上開有“工字形”槽，是操縱桿的活動空間；并且后半部的槽上開有限位孔，用來固定操縱桿的位置。該操縱系統通過汽車尾部的左右兩個操縱桿來控制攪拌筒的正、反轉和轉速，從而來完成進出料以及攪拌動作。
Control system: it is the control part of the whole automatic feeding mixer. The control panel is provided with "I-shaped" slot, which is the active space of the control lever; And a limit hole is opened on the groove of the rear half to fix the position of the control lever. The control system controls the forward, reverse and rotational speed of the mixing drum through the left and right control levers at the rear of the vehicle, so as to complete the feeding and discharging and mixing actions.
供水系統：攪拌車的供水系統主要用來清洗攪拌裝置。該車型的供水系統共有兩種型式，一種是離心水泵供水系統；一種是壓力水箱供水系統。
Water supply system: the water supply system of the mixer truck is mainly used to clean the mixing device. There are two types of water supply system for this vehicle, one is centrifugal water pump water supply system; One is the pressure water tank water supply system.
關于自上料攪拌車置罐體可選材質這一事情的講解就到這里了，如果您對此有什么疑問要解答，就來我們網站http://www.bflrsn.cn咨詢了解吧。
This is the end of the explanation about the optional material for the tank body of the self loading mixer. If you have any questions about this, please come to our website http://www.bflrsn.cn Consult and understand.
下一篇：攪拌車的驅動裝置維護保養指導上一篇：攪拌車駕駛時要注意許多類難題了
