全自動攪拌車應該如何來保護呢？
現在根據人們不同的需求就會有各種需求的車輛，關于運輸混凝土的需求就會有攪拌車，那么很多人都會問全自動攪拌車應該如何來保護呢？今天讓全自動攪拌車廠家來說說吧。
Now, according to different needs of people, there will be vehicles with various needs, and there will be mixer trucks for concrete transportation. So many people will ask how to protect fully automatic mixer trucks? Today, let the manufacturer of the automatic mixer talk about it.
1.底片機將軸承加載，因而杰出的光滑度是軸承壽數的主要因素。它直接影響機器的使用壽數和正常運行時刻。因而，有必要清洗注入的滑油，本機的一次注油點（1）翻滾軸承（2）翻滾軸承（3）所有齒輪（4）可動軸承，滑動面密封應杰出。
1. The negative film machine loads the bearing, so the outstanding smoothness is the main factor of bearing life. It directly affects the service life and normal operation time of the machine. Therefore, it is necessary to clean the injected lubricating oil. The primary oil injection point of the machine (1) rolling bearing (2) rolling bearing (3) all gears (4) movable bearing, and the sliding surface seal should be outstanding.
2.新設備的車輪簡單松動，應經常查看。
2. The wheels of new equipment are loose and should be checked frequently.
3.注意機器的各個部分是否正常工作。
3. Pay attention to whether all parts of the machine work normally.
4.注意磨損零件的磨損程度，并隨時替換磨損零件。
4. Pay attention to the wear degree of worn parts, and replace worn parts at any time.
5.放置移動設備的機架平面上的塵埃和其他塵埃，以避免當機器遇到堅不可摧的材料而造成嚴重事故時，可移動軸承在機架上移動。您需要確保沒有對象。
5. The dust and other dust on the frame plane of the mobile equipment shall be placed to avoid moving the movable bearing on the frame when the machine encounters impregnable materials and causes serious accidents. You need to ensure that there are no objects.
6.有必要升高軸承油的溫度并當即停車以承認原因并。
6. It is necessary to raise the temperature of bearing oil and stop immediately to recognize the cause and eliminate it.
7.如果在翻滾齒輪工作時產生磕碰，應當即停放，查看并磕碰。
7. If the rolling gear is bumped during operation, it should be parked immediately to check and eliminate the collision.
每天用車后，仔細清潔油箱外表面和內腔，否則混凝土凝固后你的車會越來越少裝載。除了清理殘余材料，還需要清理車輛，如支撐輪和輥道。石頭經常會殘留，久而久之會降低你鋼結構的正常使用壽命。
After using the car every day, carefully clean the outer surface and inner chamber of the fuel tank, otherwise your car will load less and less after the concrete has solidified. In addition to cleaning up residual materials, it is also necessary to clean up vehicles, such as support wheels and roller tables. Stone often remains, which will reduce the normal service life of your steel structure over time.
以上就是關于開攪拌車時需要注意的問題和如何保養攪拌車的解答，希望對大家有所幫助。更多相關內容就來我們網站http://www.bflrsn.cn進行咨詢吧！
The above are the answers to the problems that need to be paid attention to when operating the mixer and how to maintain the mixer. I hope it will be helpful to everyone. More relevant content will come to our website http://www.bflrsn.cn Consult!
