自上料攪拌車廠家這么多，該買誰的呢？
如今越來越多的工程老板選擇購入自動上料攪拌車來生產混凝土開展工程，一來效率高，二來回報高，但是不少老板在購車前面臨選擇的困擾，國內自上料攪拌車廠家這么多，該買誰的呢？
Nowadays, more and more project bosses choose to purchase automatic feeding mixers to produce concrete for the project. On the one hand, the efficiency is high, and on the other hand, the return is high. However, many bosses face the problem of choice before purchasing cars. There are so many domestic manufacturers of automatic feeding mixers, who should buy it?
看品牌，有保障
Look at the brand and guarantee
當下，雖說自動上料攪拌車的技術已經比較成熟，但是在生產工藝、用料等方面，個品牌之間還是存在較大差距，特別是大品牌和家庭作坊生產出來的產品，質量肯定是有差別的。所以，這里給出的建議是在預算運出的條件下，還是要選擇有保障的大廠家品牌。因為對于大廠家品牌來講，用戶口碑為重要，因此會更注重產品質量。
At present, although the technology of automatic feeding mixer has been relatively mature, there is still a big gap between brands in terms of production technology, materials, etc., especially the quality of products produced by big brands and family workshops. Therefore, the suggestions given here are to choose a guaranteed big manufacturer brand under the condition of budget shipment. As for the brands of large manufacturers, the user registration is important, so they will pay more attention to product quality.
小作坊生產出來的產品，很大程度上是抱著賣一臺賺一臺的想法，生產過程中沒有標準的工藝和流程，質量難保，所以雖然價格便宜，但是用車的時候你可能會犯難。
The products produced by the small workshop, to a large extent, are based on the idea of selling one set to earn one set. There is no standard process and flow in the production process, and the quality is difficult to guarantee. Therefore, although the price is cheap, you may be in trouble when using the car.
其次是大廠家品牌的售后服務更加完善，自上料攪拌車的作業場所環境惡劣，加上頻繁作業，不可避免會出現小故障，及時到位的維修非常重要。
Secondly, the after-sales service of big manufacturers' brands is more perfect. The working environment of self loading mixer is poor. In addition, frequent operations will inevitably lead to minor failures. Timely and in place maintenance is very important.
液壓系統，很關鍵
Hydraulic system, it's critical
自動上料攪拌車經常高負荷運作，所以對液壓系統的穩定性要求很高。在購買自動上料攪拌車時，一定要問清液壓油泵、馬達用的是什么牌子，性能如何。尤其在細節上，能看出一個品牌的特質，所以液壓系統中的連接材質、接頭等都詢問清楚。
The automatic feeding mixer often operates at a high load, so the stability of the hydraulic system is highly required. When purchasing the automatic feeding mixer, be sure to ask what brand the hydraulic oil pump and motor use and how their performance are. Especially in details, the characteristics of a brand can be seen, so the connection materials and joints in the hydraulic system can be inquired clearly.
攪拌罐，看材質
Mixing tank, depending on the material
攪拌罐是攪拌混凝土的場所，耐磨性須要好，攪拌罐內的葉片同樣需要高強度耐磨。因此用料很重要，可材質是不容易分辨出來的，所以這樣的情況下跟著品牌選擇走，因為大廠品牌基本不會偷工減料。
The mixing tank is a place for mixing concrete, and the abrasion resistance must be good. The blades in the mixing tank also need high strength and abrasion resistance. Therefore, the material is very important, but the material is not easy to distinguish, so in this case, follow the brand choice, because the big factory brand will not cut corners.
綜合來講，買攪拌車的時候不要貪便宜，其次要看品牌，對品牌產品有深入了解，不要僅僅對比價格后，要購買自動上料攪拌車之前好去工廠實際考察生產過程，親自試駕攪拌車，模擬運作感受液壓動作，這樣更有助于你選對產品。更多相關事項就來我們網站http://www.bflrsn.cn咨詢！
To sum up, when buying a mixer, don't be greedy. Next, look at the brand and have a deep understanding of the brand products. Don't just compare prices. Before buying an automatic feeding mixer, go to the factory to actually investigate the production process, test drive the mixer personally, simulate the operation and feel the hydraulic action, which will help you choose the right product. Come to our website for more information http://www.bflrsn.cn consulting service
下一篇：攪拌車的裝置驅動使用及操作注意上一篇：全自動攪拌車應該如何來保護呢？
